IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 713 / 1665

WindO/I-NV4 User’s Manual
10-107
5 Message Display
10
Data Displa
ys
Specify Color by Device Address: Specifies the text and plate colors by the value of the device
address.
Device Address: Specify the word device that stores the color data for the text or plate.
Click to display the Tag Editor. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-68.
This uses address 1 to specify the text and plate colors when the
Flash check box has been selected.
Color data assignments that are stored to device addresses are given below.
For color data, refer to Appendix “1 Color Number” on page A-1.
D0=
Lower byte Upper byte
0 x 0 0
Lower byte Upper byte
0 x F 7
D0=
Lower byte Upper byte
0 x 1 4 0 x 1 6
D0 0 x 0 0 0 x F 7
Lower byte Upper byte
D0 0 x 1 4 0 x 1 6
HG SERIES
HG SERIES
MICRO/I External device
Text color Plate color
Text color Plate color
Device Address
bit bit
15 8
bit
7
bit
0
Upper byte
Plate color
Device Address
Text color
Plate color when flashing
Device 1
Text color when flashing
Lower byte
HG SERIES
HG SERIES
Flashing
Lower byte Upper byte
0 x 1 4 0 x 1 6
Lower byte Upper byte
0 x F 7 0 x 2 3
Text color Plate color
Device Address
Device 1
Text color
when flashing Plate color
when flashing