IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 77 / 1665

WindO/I-NV4 User’s Manual
2-45
3 Configuration & Functions
2
WindO/
I-NV4 F
eatur
es & B
asic Oper
ations
The quick access toolbar moves below the ribbon.
To return the quick access toolbar to its original position, click the button and then click Show above the Ribbon .
■
Minimize the Ribbon
You can change the format of the ribbon to be displayed only as tabs.
Click the button on the quick access toolbar and then click Minimize the Ribbon .
The ribbon is displayed as only tabs.
Click on a tab to display its commands.
To return the ribbon to its original state, click the button and then click on the Maximize the Ribbon .
You can also change the quick access toolbar display position to be below the ribbon with the following
methods.
• Right click the quick access toolbar or the ribbon and then click Show below the Ribbon .
• Select the Show Quick Access Toolbar below the Ribbon check box on the Customize on the
WindO/I-NV4 Options dialog box.
You can also return the quick access toolbar to its original position with the following methods.
• Right click the quick access toolbar or the ribbon and then click Show above the Ribbon .
• Select the Show Quick Access Toolbar below the Ribbon check box on the Customize on the
WindO/I-NV4 Options dialog box.
You can also change the ribbon to be displayed as only tabs with the following methods.
• Right click the quick access toolbar or the ribbon and then click Minimize the Ribbon when switching to
the tab only display, or click Maximize the Ribbon when returning to the original state.
• Double click a tab.