manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 90 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 90

3 Configuration & Functions

2-58

WindO/I-NV4 User’s Manual

■

Snap to Grid

Click 

 to align objects to the grid.

■

Grid Settings

You can change the style and spacing of the grid displayed in the editing window.

Click 

 to display the Grid Settings dialog box. Configure the items and click the 

OK

 button.

Type:

Selects the type of grid.
Touch Panel:

Aligns the grid to the touch panels.

Other:

Aligns the grid to the specified spacing.
Enter the spacing for the grid in 

Horizontal

 and 

Vertical

.

Style:

Select the grid style with 

Dot

 or 

Line

.

Color:

Select the grid color (color: 256 colors, monochrome: 16 shades).
Click this button to open the color palette. Select the color with the color palette.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments