manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 671 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 671

WindO/I-NV4 User’s Manual

10-65

3 Picture Display

10

Data Displa

ys

■

Range of Value

Configures the range of values to read from the Source Device Address with a fixed value or a value of device 
address. 
Converts the read value to the specified angle range, and then rotate the picture.
This option can only be configured when the 

Use Custom Settings

 check box is selected. When the 

Use Custom 

Settings

 check box is cleared. only the 

Maximum

 can be specified with a fixed value.

Specifies the range of values that corresponds to the range of angle.

■

Range of Angle

Configures the range of the rotation angle with a fixed value or a value of device address. This option can only be 
configured when the 

Use Custom Settings

 check box is selected.

Specifies the range of angle for rotation.

Value:

Specifies as constants.

Device Address:

Specifies as the values of word devices.

Minimum, Maximum: Specifies the minimum and maximum values.

If 

Value

 is selected, the minimum and maximum values that can be specified will depend on 

the data type selected by 

Data Type

. For details about data types, refer to Chapter 2 “1.1 

Available Data” on page 2-1. 

If 

Device Address

 is selected, specify the word device to be read. Click 

 to display the Tag 

Editor. For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address 
Settings” on page 2-68.

When the Minimum is bigger than the Maximum, the picture is not rotated.

Value:

Specifies as constants.

Device Address:

Specifies as the values of word devices.

Start, End:

Specifies the start angle of rotation (-360° to 360°) and the end angle of rotation (-360° to 
360°).
If 

Value

 is selected, the start and end angles that can be specified will depend on the data 

type selected by 

Data Type

. For details about data types, refer to Chapter 2 “1.1 Available 

Data” on page 2-1. 

If 

Device Address

 is selected, specify the word device to be read. Click 

 to display the Tag 

Editor. For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address 
Settings” on page 2-68.

The direction of rotation is as follows.
Start angle < End angle: Clockwise
Start angle > End angle: Counterclockwise

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments