IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 400 / 1665

3 Text
7-28
WindO/I-NV4 User’s Manual
■
Vertical Writing
Select this check box to display text vertically.
This option can only be configured when
Japanese , European , Chinese , Taiwanese , Korean , Central
European , Baltic , Cyrillic or Windows is selected for Font .
■
Windows Font
Configures the font to use as the Windows Font.
Select
Windows for Font to display the current settings. You can specify the character spacing (0 to 100) and the
line spacing (0 to 100). To change the settings other than the character spacing and line spacing, click Change to
display the Font Settings dialog box.
This option can only be configured if the Use Text Manager check box is cleared.
For details, refer to Chapter 2 “Windows Font” on page 2-13.
■
Use Text Manager
Select this check box to use text registered in Text Manager.
■
Text ID
Specifies the Text Manager ID number (1 to 32000) when using text registered in Text Manager.
Click
to display Text Manager.
This option can only be configured when the Use Text Manager check box is selected.
■
Text
Enter the text to display. The maximum number is 3737 characters.
The characters that can be entered vary based on the font selected by
Font . For details, refer to Chapter 2 “1.2
Available Text” on page 2-6.
This option can only be configured if the
Use Text Manager check box is cleared.
■
Text Color
Selects the color for the displayed text (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
■
Magnification
This option can only be configured when Japanese , European , Chinese , Taiwanese , Korean , Central
European , Baltic , or Cyrillic is selected for Font .
■
Size
Specifies the character size (8 to 128).
This option can only be configured when
Stroke is selected for Font .
■
Background Color
Selects the background color for the text (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for installations of Windows that support East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
le edge
Horizontal
display
Next
characters
A newline is counted as two characters.
W, H: Selects the zoom factor for characters (0.5, 1 to 8).