manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 640 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 640

2 Character Input

10-34

WindO/I-NV4 User’s Manual

●

View

 Tab

■

Image Type

Select the type of graphic to be used to represent the part.

■

Browse

Select the type of graphic to be used to represent the part from the list of graphics. Click this button to display the 
View Browser or Picture Manager, depending on the setting for 

Image Type

.

■

Plate Color

Selects the plate color of the standard graphic (color: 256 colors, monochrome: 16 shades).
Click 

Color

 to display the Color Palette. Select a color from the Color Palette.

■

Flange

Standard:

Uses the default graphic for WindO/I-NV4.

Picture:

Uses an image file saved using Picture Manager.
For details about image file restrictions, refer to Chapter 2 “1.4 Available Image Files” on page 2-20.

None:

The plate and the flange of the part are not displayed. Only the text is displayed.

Plate color

Foreground Color, Background Color: Selects the foreground and background colors of the flange of the standard 

graphic (color: 256 colors, monochrome: 16 shades).
Click 

Color

 to display the Color Palette. Select a color from the Color Palette.

Pattern:

Selects a pattern for the flange of the standard graphic.
Click 

Pattern

 to display the Pattern Palette. Select a pattern from the Pattern 

Palette.

Flange

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments