IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 876 / 1665

4 Meter
11-70
WindO/I-NV4 User’s Manual
●
Scale Tab
The Scale tab is displayed in Advanced mode.
■
Show Ticks
Select this check box to display a scale on a or meter.
Scales can only be configured when
Standard or None is selected under Image Type on the View tab.
Major Divisions: Enter the number of major scale divisions (1 to 20).
Minor Divisions: Enter the number of minor scale divisions (1 to 20).
Color: Selects the color of scales (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
Show Tick Numbers: Select this check box to display numbers along the scale.
Digits: Sets the number of digits to be displayed (1 to 10).
Can only be set when Float32(F) is selected for Data Type under the
General tab.
Display Floating Point: Select this check box to display a floating point along the scale.
Can only be set when Float32(F) is selected for Data Type under the
General tab.
Floating Digits: Sets the number of digits for the fractional parts of numbers (1 to 8)
from the number of digits specified for Digits .
Can only be set when the Display Floating Point check box is selected.
Color: Selects the color of displayed text (color: 256 colors, monochrome: 16
shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
• If the area for displaying the scale is small, the scale will not be displayed properly.
• When the standard graphic
F0001 , F0101 , or F0201 (no flange) are selected, the scale cannot be
configured.