manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 528 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 528

6 Multi-Button

8-126

WindO/I-NV4 User’s Manual

■

Recording Channel

*2

The recording of images starts.
Selects 

Channel 1

 or 

Channel 2

 to record a video only (no audio) out of the signals input from the device. This 

setting is enabled only if 

Rec.

 was selected using the Key Browser.

■

Recording Target

*3

The recording of images and sound starts. 
Select the target to record out of the signals input from the device. This setting is enabled only if 

Rec.

 was selected 

using the Key Browser.

*2 HG5G/4G/3G-V only
*3 This is applicable for HG4G/3G with a video interface only.

• Movie files cannot be recorded during playback.
• While data is being recorded after an event occurs with the event recording function and while data is 

being saved to the external memory device, recording cannot be executed with a Key Button, Multi-
Button, or Multi-Command configured with the recording function. Also, during these situations, the 
value of HMI Special Data Register LSD155-0 changes to 1. For details, refer to Chapter 33 “HMI Special 
Data Register (LSD)” on page 33-7.

Video and Audio:

Records images and sound.

Video only (No Audio):

Records images only.

• Movie files cannot be recorded during playback.
• While data is being recorded after an event occurs with the event recording function and while data is 

being saved to the external memory device, recording cannot be executed with a Key Button, Multi-
Button, or Multi-Command configured with the recording function. Also, during these situations, the 
value of HMI Special Data Register LSD155-0 changes to 1. For details, refer to Chapter 33 “HMI Special 
Data Register (LSD)” on page 33-7.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments