IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 389 / 1665

WindO/I-NV4 User’s Manual
7-17
1 Shapes
7
Dr
awings
●
Properties of Pie Dialog Box
This section describes items and buttons in the Properties dialog box.
■
Line Width
Selects the line width for the pie from the following.
1 dot , 3 dots , 5 dots
3 dots and 5 dots can only be configured when Solid is selected for Line Type .
■
Line Type
Selects the line type for the pie from the following.
Solid , Dot , Dash , Long Dash , Long Dash Dot , Long Dash Dot Dot
Dot , Dash , Long Dash , Long Dash Dot , and Long Dash Dot Dot can only be configured when 1 dot is selected
for Line Width .
■
Foreground Color, Background Color
Selects the foreground color and the background color to use for the pie (color: 256 colors, monochrome: 16 shades).
Click either button to display the Color Palette. Select a color from the Color Palette.
■
Pattern
Selects the pattern or tonal gradation for the pie.
Click this button to display the Pattern Palette. Select a pattern or tonal gradation from the Pattern Palette.
■
Flash
Select this check box to make the pie flash.
The flash interval is specified with
Flashing Cycle on the System tab in the Project Settings dialog box.
■
Coordinates
X, Y: Specifies the display position of the pie in coordinates.
With the upper-left corner of the screen as the origin, the upper-left corner of the rectangle that
circumscribes the circle with the same center as the pie is the X and Y coordinates.
X: 0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)
(0, 0)
X
Y
Screen
Pie