IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 388 / 1665

1 Shapes
7-16
WindO/I-NV4 User’s Manual
1.7 Pie
●
Pie Drawing Procedure
This section describes the procedure for drawing pies.
1
On the Home tab, in the Drawings group, click Shapes , and then click (Pie) under Basic Shapes .
The mouse cursor changes to (pencil).
2
Click and hold the mouse button at the location (start point) to start drawing the pie on the edit screen.
3
Drag the mouse to the stop point location so that location becomes the opposite angle of the rectangle.
A pie is drawn that inscribes the rectangle made from the opposite angles of the start point and the stop point.
Stop
point
Drag
Start
point
• To change the style of the drawn pie, perform one of the following operations.
- Double click the pie to open the Properties dialog box
- Select the pie and select the style with
Shape Style on the Format tab
- Select the pie and open the right click menu
• To change the central angle of the drawn pie, select the pie and right click on it, then click Reshape .
is displayed on the pie. Drag to the desired location. Double click the edit screen or press the
key to finish changing the shape.