IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1552

Page: 1552 / 1665

3 Settings

34-12

WindO/I-NV4 User’s Manual

3.5 System Information (System Info.)

From the Main Menu screen, press

System Information (System Info.)

, and then press

System (System)

System 2 (System 2)

to display the system information screen. This screen displays information such as the

MICRO/I type No., stored system software type and version No.
To return to the Main Menu screen, press

Main Menu (Main Menu)

at the top of the screen.

●

System (System)

From the Main Menu screen, press

System Information (System Info.)

, and then press

System (System)

Displays the following settings:

• MICRO/I type No.
• MAC address
• Boot software version
• System software version

To return to the system information screen, press

System Info. (System Info.)

at the top of the screen.

●

System 2

From the Main Menu screen, press

System Information (System Info.)

, and then press

System 2 (System 2)

Displays the following settings:

• Project name
• External Device Communication 1 to 4 and Communication Interface

- External device manufacturer
- Communication driver name
- Communication driver version

To return to the system information screen, press

System Info. (System Info.)

at the top of the screen

●

Font (Font)

From the Main Menu screen, press

System Information (System Info.)

, and then press

Font (Font)

Displays the font type stored in MICRO/I.
To return to the system information screen, press

System Info. (System Info.)

at the top of the screen.

Only the first 15 characters of the project name are displayed.

«
...
1550
1551
1552
1553
1554
...
»

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series

Reviews:

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1552 / 1665

Search results

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series

Reviews: