IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1334 / 1665

3 Simulator
26-12
WindO/I-NV4 User’s Manual
■
Monitor
The registered device addresses are displayed in a list.
Select the device address list from the List to show the device addresses registered in the list.
Device Address: The registered device addresses are displayed.
Double-click a cell to register or change a device address. Click
to display the Tag Editor.
For details on how to configure device address settings, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-68.
toggles between showing and hiding comments. When comments are displayed, click to
display a popup menu, then click Comment and select the check box.
Comment: Displays comments on device addresses saved in Tag Editor. Comments are displayed only
after you click next to
Device Address to display a popup menu, then click Comment and
select the check box.
Data Type: Selects the data format of the displayed value. For details, refer to Chapter 2 “1.1 Available
Data” on page 2-1.
Words: Specify the number of word devices (1 to 16) stored the display value. 2 single-byte characters
can be displayed by 1 word.
This option can only be configured
String(European) , String(Japanese) ,
String(Chinese) , String(Taiwanese) , String(Korean) , String(Central European) ,
String(Baltic) or String(Cyrillic) is selected as Data Type.
The storage order for word device address data is set according to Storage Method of
String Data on the System tab in the Project Settings . For details, refer to Chapter 4
“Storage Method of String Data” on page 4-28.
Value: Enables values of device addresses to be display and changed. The value range depends on
the data type. For details, refer to Chapter 2 “1.1 Available Data” on page 2-1.
UBIN16(W) , BIN16(I) , UBIN32(D) , BIN32(L) , BCD4(B) , BCD8(EB) , Float32(F) :
Displays the current value of device address in decimal format. To change a value, double-
click a cell and then enter a value.
The value range depends on the data type. For details, refer to Chapter 2 “1.1 Available
Data” on page 2-1.
Click to toggle display of
HEX and BIN format. To display HEX and BIN values, click
to display a popup menu, then click HEX and BIN and select the check box.
String(European) , String(Japanese) , String(Chinese) , String(Taiwanese) ,
String(Korean) , String(Central European) , String(Baltic) , String(Cyrillic) :
Displays the current value of device address in string. To change a value, double-click a cell
and then enter the messages in the language selected.
Hexadecimal, Binary: Displays the current value of device address in hexadecimal and binary format. To change a
value, double-click a cell and then specify a value.
The value range depends on the data type. For details, refer to Chapter 2 “1.1 Available Data”
on page 2-1.
Comments are displayed only after you click next to
Value to display a popup menu and
then select the HEX and BIN check box.
For details about how to register device addresses to monitor in the Custom Monitor and how to reuse
registered device addresses, refer to Chapter 25 “Custom Monitor” on page 25-7.