IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1173 / 1665

WindO/I-NV4 User’s Manual
21-3
2 Sound Function Configuration Procedure
21
Sound F
unction
4
Double click the cell under Save To and select the save destination for the sound file.
■
Int. Memory
Saves the sound file to internal memory.
■
External Memory Device
Saves the sound file to external memory device inserted in the MICRO/I. The external memory device to be saved is
the SD memory card.
5
Double click the cell under Trigger Condition and select Device Address .
6
Specify the device address that will trigger playing the sound file in Trigger Device Address .
Double-click the cell or click the cell and then click in the Trigger Device Address column to select a device
address from the Tag Editor. For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-68.
7
Configure Repeat , Change Volume Level , and any other options, and then click OK .
The Sound Settings dialog box closes.
This concludes the configuration to play a sound file when a value of device address changes to 1.
●
To play a sound file as a touch sound instead of a beep.
1
On the Configuration tab, in the System Setup group, click Sound .
The Sound Settings dialog box is displayed.
2 Double-click the cell in the File Name column to register a sound file.
The Open dialog box is displayed.
The procedures to save the sound file to the external memory device are as follows.
• On the Home tab, click the arrow under Download , and click Project Data to display the Download
dialog box. Select the Sound Files check box of Download following files to External Memory
Device , and click OK .
• On the Home tab, click the arrow under Download , and click Files to External Memory Device to
display the Open dialog box. Specify a sound file and click Open .