IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1201 / 1665

WindO/I-NV4 User’s Manual
23-1
23
Use
r Ac
counts and the Sec
urit
y Function
This chapter outlines user accounts and the Security function, how to configure them, and their operation on the
MICRO/I and in WindO/I-NV4.
1.1 User Accounts
The Security function protects access to data and MICRO/I displays and operations using accounts. Accounts are the
privileges to use the MICRO/I and data. By assigning accounts to users, you can protect the MICRO/I from being
inappropriately operated and protect project data from alterations and misuse.
Accounts assigned to users are called user accounts.
In WindO/I-NV4, security groups are used as accounts.
There are two types of security groups: provided security groups (Administrator, Operator, and Reader) and user-
created security groups. One or more of these security groups can be assigned to users.
One or more users must always be assigned to Administrator.
A user name and password are associated with a user account and up to 15 user accounts can be created.
Chapter 23
User Accounts and the Security Function
1 Overview
HG3G HG2G-5F HG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
User
Assign
Account
User account
Privileges to operate the MICRO/I
Privileges to access data
Assign
Assign Assign
Provided
security groups User-created
security groups
(12 max)
Administrator
Operator
Reader
GroupA
GroupB GroupB
Administrator
User account: User account: User account:
User4 User3 User15 User2 User1
11111111 22222222 33333333 44444444 EEEEEEEE Password:
User name:
User account: