![background image](http://html1.mh-extra.com/html/hyundai/bc3/bc3_owners-manual_2195234528.webp)
8-31
08
ODN8079020
ODN8079020
5. Insert the sealant bottle into the
housing (5) of the compressor so that
the bottle is upright.
6. Ensure that the compressor is
switched off, position 0.
OBC3080011
OBC3080011
NOTICE
Securely install the sealant filling hose
to the valve. If not, sealant may flow
backward, possibly clogging the filling
hose.
OBC3080025
OBC3080025
7. Connect between compressor and the
vehicle power outlet using the cable
and connectors (4).
8. With the engine start/stop button
position on or ignition switch position
on, switch on the compressor and let
it run for approximately 5~7 minutes to
fill the sealant up to proper pressure.
(refer to the Tire and Wheels, chapter
2). The inflation pressure of the tire
after filling is unimportant and will be
checked/corrected later.
Be careful not to overinflate the tire
and stay away from the tire when
filling it.
NOTICE
- Tire pressure
Do not attempt to drive your vehicle
if the tire pressure is below 29
PSI(200kpa). This could result in an
accident due to sudden tire failure.
9. Switch off the compressor.
10. Detach the hoses from the sealant
bottle connector and from the tire
valve.
Return the Tire Mobility Kit to its storage
location in the vehicle.
Summary of Contents for BC3
