Hyundai BC3 Owner'S Manual Download Page 88

Page: 88 / 651

3-55

Air bag inflation conditions

OBC3030027

Front air bags

Front air bags are designed to inflate

in a frontal collision depending on the

severity of impact of the front collision.

OBC3030028

OAC3039029TU

Side and curtain air bags

Side and curtain air bags are designed

to inflate when an impact is detected

by side collision sensors depending on

the severity of impact resulting from

a side impact collision. Although the

driver’s and front passenger’s air bags

are designed to inflate only in frontal

collisions, they also may inflate in other

types of collisions if the front impact

sensors detect a sufficient impact. Side

and curtain air bags are designed to

inflate only in side impact collisions

or rollover situations (if equipped with

rollover sensor), but they may inflate

in other collisions if the side impact

sensors detect a sufficient impact. If

the vehicle chassis is impacted by bumps

or objects on unimproved roads, the

air bags may deploy. Drive carefully on

unimproved roads or on surfaces not

designed for vehicle traffic to prevent

unintended air bag deployment.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands