6-53
06
START STOP COASTING (SSC) (FOR 48V MHEV)
Start Stop Costing helps reduce fuel
consumption by automatically stopping
the engine when the vehicle is in motion.
The engine is stopped when vehicle
speed can be maintained without the
accelerator pedal being depressed.
SSC operating conditions
Start Stop Coasting will operate under
the following conditions.
• ECO is selected for driving mode
• Vehicle speed maintains a certain
speed
• The accelerator or brake pedal is not
depressed
When Start Stop Coasting is operating,
the ‘Costing!’ message appears on the
cluster.
Engine restarting conditions
• The engine will restart manually when:
- The accelerator pedal is depressed
- The brake pedal is depressed
- The gear is shifted
• The engine will restart automatically
when:
- The steering wheel is steered above
30~45 degrees
- The road gradient is between -4~+4
percent
- The remaining high voltage battery
level or 12 volt battery level is low
NOTICE
•
Start Stop Coasting operates only
when Drive mode is ECO.
•
Start Stop Coasting may deactivate
depending on indoor or outdoor
temperature conditions.
•
Start Stop Coasting may deactivate
depending on climate control
conditions (defrost, fan speed, etc.).
•
Do not shift without depressing
the clutch pedal while activating
Start Stop Coasting. It may cause
transmission damage. Shift the gear
all the way after the clutch pedal
is fully depressed. (equipped with
Intelligent Manual Transmission
(iMT))
Summary of Contents for BC3
