Hyundai BC3 Owner'S Manual Download Page 467

Page: 467 / 651

Driver assistance system

7-128

FORWARD/REVERSE PARKING DISTANCE WARNING (PDW)

Forward/Reverse Parking Distance

Warning will help warn the driver if an

obstacle is detected within a certain

distance when the vehicle is moving

forward or in reverse at low speeds.

Detecting sensor

OBC3070048

OBC3070049

[1] : Front ultrasonic sensors,

[2] : Rear ultrasonic sensors

Refer to the picture above for the

detailed location of the detecting

sensors.

System settings

Warning Volume

Select ‘Driver assistance

Warning

volume’ from the cluster or infotainment

system Settings menu to change the

Warning volume to ‘High’, ‘Medium’,

or ‘Low’ for Forward/Reverse Parking

Distance Warning.

Parking Distance Warning Auto On

To use Parking Distance Warning Auto

On function, select ‘Driver assistance

Parking safety

Parking distance

warning auto on’ from the cluster or

infotainment system Settings menu.

System operation

Operating button

OBC3070050

Parking Safety button

• Press the Parking Safety (

) button

to turn on Forward/Reverse Parking

Distance Warning. Press the button

again to turn off the system.

• When Forward/Reverse Parking

Distance Warning is off (button

indicator light off), if you shift the

gear to R (Reverse), the system will

automatically turn on.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands