Hyundai BC3 Owner'S Manual Download Page 321

Page: 321 / 651

6-54

Driving your vehicle

DRIVE MODE INTEGRATED CONTROL SYSTEM

OBC3060013

The drive mode may be selected

according to the driver’s preference or

road condition.
The system resets to be in the COMFORT

mode, when the engine is restarted.
When the engine is restarted, Drive

Mode is set to ECO by default. (for 48

MHEV)

Information

If there is a problem with the instrument

cluster, the drive mode will be in

NORMAL mode and may not change to

SPORT mode.

The mode changes, as below, whenever

the DRIVE MODE button is pressed.

ECO

(if equipped)

COMFORT SPORT

When COMFORT mode is selected, it is

not displayed on the instrument cluster.

ECO mode : ECO mode helps improve

fuel efficiency for eco-friendly driving.
COMFORT mode : COMFORT

mode provides smooth driving and

comfortable riding.
SPORT mode : SPORT mode provides

sporty but firm riding

NOTICE

Start Stop Coasting (SSC) is activated

when Drive Mode is ECO. (for 48 MHEV)

The driving mode will be set to NORMAL

or ECO mode when the engine is

restarted.
• If it is in NORMAL/SPORT mode,

NORMAL mode will be set, when the

engine is restarted.

• If it is in Eco mode, Eco mode will

be set when the engine is restarted.

When the ignition is turned on, Drive

Mode is set to ECO by default. (for 48

MHEV)

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands