manualshive.com logo in svg

Hyundai BC3, Owner'S Manual

Share
Download
Hyundai BC3 Owner'S Manual Download Page 346

07

7-7

 WARNING

•  Even if there is a problem with 

Forward Collision-Avoidance 

Assist, the vehicle’s basic braking 

performance will operate normally. 

• During emergency braking, 

braking control by the system will 

automatically cancel when the driver 

excessively depresses the accelerator 

pedal or sharply steers the vehicle. 

 CAUTION

Forward Collision-Avoidance Assist 

operating speed range may reduce 

due to the conditions of the vehicle or 

pedestrian in front or surroundings. 

Depending on the speed, the system 

may only warn the driver, or the system 

may not operate.

 Information

In a situation where collision is imminent, 

braking may be assisted by Forward 

Collision-Avoidance Assist when braking 

is insufficient by the driver.

System malfunction and 

limitations

System malfunction

OTM070094L

OTM070094L

When Forward Collision-Avoidance 

Assist is not working properly, the 

‘Check forward safety systems’ warning 

message will appear, and the 

 and 

 warning lights will illuminate on the 

cluster. We recommend that the system 

be inspected by an authorized HYUNDAI 

dealer.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands