Hyundai BC3 Owner'S Manual Download Page 178

Page: 178 / 651

5-43

OAE046469L

Position light position (

)

The position light, license plate light and

instrument panel light are turned ON.

OAE046467L

Headlight position (

)

The headlight, position light, license

plate light and instrument panel light are

turned ON.

Information

The ignition switch must be in the ON

position to turn on the headlight.

High beam operation

OAE046453L

To turn on the high beam headlight,

push the lever away from you.
The high beam indicator will light when

the headlight high beams are switched

on.
To turn off the high beam headlight, pull

the lever towards you. The low beams

will turn on.

WARNING

Do not use high beam when there are

other vehicles approaching you. Using

high beam could obstruct the other

driver’s vision.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands