Hyundai BC3 Owner'S Manual Download Page 174

Page: 174 / 651

5-39

Fuel filler door

Opening the fuel filler door

OBC3050027

1. Turn the engine off.
2. Ensure the driver’s door is unlocked.
3. Push the fuel filler door near the 3

o‘clock position.

OBC3050028

3. Pull the fuel filler door out (1) to fully

open.

4. To remove the fuel tank cap (2), turn

it counterclockwise. You may hear a

hissing noise as the pressure inside

the tank equalizes.

5. Place the cap on the fuel filler door

(3).

Information

If the fuel filler door does not open

because ice has formed around it, tap

lightly or push on the door to break the

ice and release the door. Do not pry on the

door. If necessary, spray around the door

with an approved de-icer fluid (do not use

radiator anti-freeze) or move the vehicle

to a warm place and allow the ice to melt.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands