Hyundai BC3 Owner'S Manual Download Page 74

Page: 74 / 651

3-41

OHI038146

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the distinct

“click” sound.

Information

Position the release button so that it is

easy to access in case of an emergency.

OHI038183L

3. Remove as much slack from the belt

as possible by pushing down on the

Child Restraint System while feeding

the shoulder belt back into the

retractor.

4. Push and pull on the Child Restraint

System to confirm that the seat belt is

holding it firmly in place.

If your CRS manufacturer instructs

or recommends you use a top-tether

anchorage with the lap/shoulder belt,

see page 3-36.

To remove the Child Restraint System,

press the release button on the buckle

and then pull the lap/shoulder belt out

of the Child Restraint System and allow

the seat belt to retract fully.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands