Hyundai BC3 Owner'S Manual Download Page 504

Page: 504 / 651

8-7

Information

An inappropriately disposed

battery can be harmful to the

environment and human

health. Dispose of the battery

according to your local law(s)

or regulations.

Jump starting procedure

1. Position the vehicles close enough

that the jumper cables will reach, but

do not allow the vehicles to touch.

2. Avoid fans or any moving parts in the

engine compartment at all times, even

when the vehicles are turned off.

3. Turn off all electrical devices such

as radios, lights, air conditioning,

etc. Put the vehicles in P (Park, for

automatic transmission/dual clutch

transmission vehicle) or neutral (for

manual transmission vehicle), and set

the parking brakes. Turn both vehicles

OFF.

1VQA4001

4. Connect the jumper cables in

the exact sequence shown in the

illustration. First connect one jumper

cable to the red, positive (+) jumper

terminal of your vehicle (1).

5. Connect the other end of the jumper

cable to the red, positive (+) battery/

jumper terminal of the assisting

vehicle (2).

6. Connect the second jumper cable to

the black, negative (-) battery/ chassis

ground of the assisting vehicle (3).

7. Connect the other end of the second

jumper cable to the black, negative (-)

chassis ground of your vehicle (4).

Do not allow the jumper cables to

contact anything except the correct

battery or jumper terminals or the

correct ground. Do not lean over the

battery when making connections.

8. Start the engine of the assisting

vehicle and let it run at approximately

2,000rpm for a few minutes. Then

start your vehicle.

If your vehicle will not start after a

few attempts, it probably requires

servicing. In this event please seek

qualified assistance. If the cause of your

battery discharging is not apparent, we

recommend that you have your vehicle

checked by an authorized HYUNDAI

dealer.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands