Hyundai BC3 Owner'S Manual Download Page 390

Page: 390 / 651

7-51

WARNING

• Collision-Avoidance Assist will

be canceled under the following

circumstances:

- Your vehicle enters the next lane by

a certain distance

- Your vehicle is away from the

collision risk

- The steering wheel is sharply

steered

- The brake pedal is depressed
- Forward Collision-Avoidance Assist

is operating

• After system operation or lane

change, you must drive to the center

of the lane. The system will not

operate if the vehicle is not driven in

the center of the lane.

OBC3070021

Collision-Avoidance Assist (while

departing)

• To warn the driver of a collision, the

warning light on the outside rearview

mirror will blink and a warning

message will appear on the cluster. At

the same time, an audible warning will

sound will blink.

• The system will operate when your

vehicle speed is below 3 km/h (2 mph)

and the speed of the vehicle in the

blind spot area is above 5 km/h

(3 mph).

• Emergency braking will be assisted to

help prevent collision with the vehicle

in the blind spot area.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands