![background image](http://html1.mh-extra.com/html/hyundai/bc3/bc3_owners-manual_2195234509.webp)
8-12
Emergency situations
OBC3080004
OBC3080004
1. Park the vehicle on a level, firm
surface.
2. Inflate the tires to the proper pressure
as indicated on the vehicle’s placard
or tire inflation pressure label located
on the driver’s side center pillar outer
panel.
3. Start the engine, press and hold the
TPMS SET button for about three
seconds to reset TPMS. The reset
process completes automatically.
4. Then check that the low tire pressure
indicator turns off after blinking for
four seconds. In case of supervision
cluster, check that “Tire pressures
stored” message is shown on the
cluster.
5. After resetting the TPMS, drive the
vehicle for approximately 20 minutes
to store the new tire pressure in the
system.
❈
If the low tire pressure indicator turns
on repeat step 3.
When resetting TPMS, the current tire
pressure is stored as a standard tire
pressure.
CAUTION
• Without inflating the tires, if you
reset TPMS, the system may not
inform you properly even though the
tires are significantly under-inflated.
You must check the proper tire
pressure before resetting TPMS.
• The TPMS may not function properly
if you do not reset TPMS when the
TPMS needs to be reset.
• If you push the TPMS reset button
while driving, the TPMS reset process
is not activated. You must push the
TPMS reset button while the vehicle
is at a complete stop.
• Tire pressure should be checked and
inflated while the tires are cold.
A cold tire means the vehicle has
been sitting for 3 hours and driven for
less than 1.6 km (1 mile) in that 3 hour
period.
Summary of Contents for BC3
