Hyundai BC3 Owner'S Manual Download Page 195

Page: 195 / 651

5-60

Convenient features

OBC3050010

Instrument panel vents

The instrument panel vent air flow can

be directed up/down or left/right using

the vent adjustment lever.
To close the vent adjustment lever,

rotate it to the outer side till the end. To

open the vent, rotate it to the inner side.

Temperature control

OBC3050104TU

The temperature will increase by turning

the knob to the right.
The temperature will decrease by

turning the knob to the left.

Air intake control

OBC3050105TU

The air intake control button is used to

select either Fresh mode (outside air) or

Recirculation mode (cabin air).

Recirculation mode

When Recirculation mode

is selected, air from the

passenger compartment

will be recirculated

through the system and

heated or cooled

according to the function

selected.

Fresh mode

When Fresh mode is

selected, air enters the

vehicle from outside and is

heated or cooled

according to the function

selected.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands