Hyundai BC3 Owner'S Manual Download Page 219

Page: 219 / 651

5-84

Convenient features

Ashtray (if equipped)

OBC3050037

To use the ashtray, open the cover.
To clean the ashtray:
The plastic receptacle should be

removed by lifting the plastic ashtray

receptacle upward after turning the

cover counterclockwise and pulling it

out.

WARNING

Ashtray use
Putting lit cigarettes or matches in

an ashtray with other combustible

materials may cause a fire.

Cup holder

OGB044046

Cups or small beverages cups may be

placed in the cup holders.

WARNING

• Avoid abrupt starting and braking

when the cup holder is in use to

prevent spilling your drink. If hot

liquid spills, you could be burned.

Such a burn to the driver could cause

loss of vehicle control resulting in an

accident.

• Do not place uncovered or unsecured

cups, bottles, cans, etc., in the cup

holder containing hot liquid while

the vehicle is in motion. Injuries may

result in the event of sudden stop or

collision.

• Only use soft cups in the cup holders.

Hard objects can injure you in an

accident.

WARNING

Keep cans or bottles out of direct sun

light and do not put them in a hot

vehicle. It may explode.

INTERIOR FEATURES

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands