Hyundai BC3 Owner'S Manual Download Page 613

Page: 613 / 651

9-71

Headlight (Low/High)

1. Turn the front wheel at inwards.

OAC3089042TU

OAC3089043TU

OBC3090055

2. Remove the Wheel guard clips (B),

bumper cover bolt (A) and bumper

upper cover blots (C).

3. Push the wheel guard aside and

remove the headlight bulb cover by

turning it counterclockwise from bulb

assembly.

OBC3090038

4. Disconnect the headlight bulb socket-

connector.

5. Unsnap the headlight bulb retaining

wire by depressing the end and

pushing it upward.

6. Remove the bulb from the headlight

assembly.

7. Install a new headlight bulb and snap

the headlight bulb retaining wire into

position by aligning the wire with the

groove on the bulb.

8. Connect the headlight bulb socket

connector.

9. Install the headlight bulb cover by

turning it clockwise.

10. Install the wheel guard in the reverse

order.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands