9-70
Maintenance
Headlight, Position Light,
Turn signal Light bulb
replacement
Type A
OBC3090036
OBC3090036
(1) Headlight(Low/High)
(2) Turn signal light
(3) Position light(if equipped)
(4) Daytime running light/
D.R.L & Position
*
1
: MFR (Multi Focus Reflector) Headlight
OLMB073042L
OLMB073042L
WARNING
• Handle halogen bulbs with care.
Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass that could cause injuries if
broken.
• Wear eye protection when changing
a bulb. Allow the bulb to cool down
before handling it.
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
• Never touch the glass with bare
hands. Residual oil may cause the bulb
to overheat and burst when lit.
• A bulb should be operated only when
installed in a headlight.
• If a bulb becomes damaged or
cracked, replace it immediately and
carefully dispose of it.
i
Information
We recommend that the headlight aiming
be adjusted after an accident or after the
headlight assembly is reinstalled.
❈
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direction,
this asymmetric part will dazzle
oncoming car driver. To prevent dazzle,
ECE regulation demand several technical
solutions (ex. automatic change system,
adhesive sheet, down aiming). This
headlamps are designed not to dazzle
opposite drivers.
So, you need not change your
headlamps in a country with opposite
traffic direction.
Summary of Contents for BC3
