Hyundai BC3 Owner'S Manual Download Page 429

Page: 429 / 651

Driver assistance system

7-90

• Detecting vehicle

OJX1079181

In the following cases, some vehicles

in your lane cannot be detected by the

sensor:

- Vehicles offset to one side
- Slow-moving vehicles or sudden-

decelerating vehicles

  - Oncoming vehicles
  - Stopped vehicles
  - Vehicles with small rear profile, such

as trailers

- Narrow vehicles, such as

motorcycles or bicycles

  - Special vehicles
  - Animals and pedestrians
  Adjust your vehicle speed by

depressing the brake pedal according

to the road and driving conditions

ahead.

OBC3070011

In the following cases, the vehicle

in front cannot be detected by the

sensor:

- Vehicles with higher ground

clearance or vehicles carrying loads

that stick out of the back of the

vehicle

- Vehicles that has the front lifted due

to heavy loads

- You are steering your vehicle
- Driving on narrow or sharply curved

roads

Adjust your vehicle speed by

depressing the brake pedal according

to the road and driving conditions

ahead.

OTM058129

• When a vehicle ahead disappears

at an intersection, your vehicle may

accelerate.

Always pay attention to road and

driving conditions while driving.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands