Hyundai BC3 Owner'S Manual Download Page 566

Page: 566 / 651

9-24

Maintenance

ENGINE OIL

Checking the engine oil level

Smartstream G 1.0 T-GDi/

Smartstream G1.0 T-GDi (48V) MHEV

OBC3090008

Smartstream G1.2

OBC3090009

Gasoline 1.4

OBC3090010

1. Follow all of the oil manufacturer’s

precautions.

2. Be sure the vehicle is on the level

ground in P (Park) with the parking

brake set and the wheels blocked.

3. Turn the engine on and allow the

engine to reach normal operating

temperature.

4. Turn the engine off and wait about ten

minutes for the oil to return to the oil

pan.

5. Pull the dipstick out, wipe it clean, and

re-insert it fully.

6. Pull the dipstick out again and check

the level. The level should be between

F (Full) and L (Low).

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands