manualshive.com logo in svg

Hyundai BC3, Owner'S Manual

Share
Download
Hyundai BC3 Owner'S Manual Download Page 204

5-69

05

OBC3050112

OBC3050112

The mode selection button controls the 

direction of the air flow through the 

ventilation system.

Face-Level (B, D)

Air flow is directed toward the upper 

body and face. Additionally, each outlet 

can be controlled to direct the air 

discharged from the outlet. 

Floor-Level (A, C, D)

Most of the air flow is directed to the 

floor, with a small amount of the air 

being directed to the windshield and 

side window defrosters.  

Floor & Defrost (A, C, D)

Most of the air flow is directed to the 

floor and the windshield with a small 

amount directed to the side window 

defrosters.

OBC3050113

OBC3050113

Defrost-Level (A, D)

Most of the air flow is directed to the 

windshield with a small amount of air 

directed to the side window defrosters.

OBC3050010

OBC3050010

Instrument panel vents 

The instrument panel vent air flow can 

be directed up/down or left/right using 

the vent adjustment lever.
To close the vent adjustment lever, 

rotate it to the outer side till the end. To 

open the vent, rotate it to the inner side. 

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands