Hyundai BC3 Owner'S Manual Download Page 580

Page: 580 / 651

9-38

Maintenance

Front windshield wiper blade

OBR2089019BR

OBR2089020BR

1. Raise the wiper arm.
2. Press and hold the both wiper blade

clip (1) and remove the blade from the

wiper arm.

3. Install the new blade assembly.
4. Return the wiper arm on the

windshield.

Rear window wiper blade

(if equipped)

OLMB073023

1. Raise the wiper arm and rotate the

wiper blade assembly (1).

2. Pull out the wiper blade assembly.

OLMB073024

3. Install the new blade assembly by

inserting the center part into the slot

in the wiper arm until it clicks into

place.

4. Make sure the blade assembly is

installed firmly by trying to pull it

slightly.

To prevent damage to the wiper arms

or other components, we recommend

that the wiper blade be replaced by an

authorized HYUNDAI dealer.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands