manualshive.com logo in svg

Hyundai BC3, Owner'S Manual

Share
Download
Hyundai BC3 Owner'S Manual Download Page 103

4-11

04

Parking Brake & Brake 

fluid warning light

This warning light illuminates:

•  When you set the ignition switch or 

the Engine Start/Stop button to the 

ON position.

  -  The parking brake & brake fluid 

warning light illuminates for about 3 

seconds and will then turn off once 

the parking brake is released.

•  When the parking brake is applied.
•  When the brake fluid level in the 

reservoir is low.

-  If the warning light illuminates with 

the parking brake released, it indicates 

the brake fluid level in the reservoir is 

low.

If the brake fluid level in the reser-

voir is low:

1. Drive carefully to the nearest safe 

location and stop your vehicle.

2. With the engine stopped, check the 

brake fluid level immediately and add 

fluid as required 

(For more details, 

refer to “Brake Fluid” in chapter 9).

 

After adding brake fluid, check all 

brake components for fluid leaks. If 

a brake fluid leak is found, or if the 

warning light remains on, or if the 

brakes do not operate properly, do not 

drive the vehicle. We recommend that 

you have the vehicle inspected by an 

authorized HYUNDAI dealer.

Dual-diagonal braking system

Your vehicle is equipped with dual-

diagonal braking systems. This means 

you still have braking on two wheels 

even if one of the dual systems should 

fail.
With only one of the dual systems 

working, more than normal pedal travel 

and greater pedal pressure are required 

to stop the vehicle.
Also, the vehicle will not stop in as short 

a distance with only a portion of the 

brake system working.
If the brakes fail while you are driving, 

shift to a lower gear for additional 

engine braking and stop the vehicle as 

soon as it is safe to do so.

 WARNING

Parking Brake & Brake Fluid warning 

light
Driving the vehicle with a warning light 

ON is dangerous. If the Parking Brake 

& Brake Fluid warning light illuminates 

with the parking brake released, it 

indicates that the brake fluid level is 

low.
If this occurs, we recommend that 

you have the vehicle inspected by an 

authorized HYUNDAI dealer.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands