Hyundai BC3 Owner'S Manual Download Page 395

Page: 395 / 651

Driver assistance system

7-56

WARNING

• Driving on a curve

OJX1079057

Blind-Spot Safety system may not

operate properly when driving on

a curved road. The system may not

detect the vehicle in the next lane.

Always pay attention to road and

driving conditions while driving.

OJX1079058

Blind-Spot Safety system may not

operate properly when driving on

a curved road. The system may

recognize a vehicle in the same lane.

Always pay attention to road and

driving conditions while driving.

• Driving where the road is merging/

dividing

OJX1079059

Blind-Spot Safety system may not

operate properly when driving where

the road merges or divides. The

system may not detect the vehicle in

the next lane.

Always pay attention to road and

driving conditions while driving.

• Driving on a slope

OBC3070019

Blind-Spot Safety system may not

operate properly when driving on

a slope. The system may not detect

the vehicle in the next lane or may

incorrectly detect the ground or

structure.

Always pay attention to road and

driving conditions while driving.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands