manualshive.com logo in svg

Hyundai BC3, Owner'S Manual

Share
Download
Hyundai BC3 Owner'S Manual Download Page 153

5-18

Convenient features

Rear Occupant Alert (ROA) 

(if equipped)

This function prevents the driver from 

leaving a passenger in the rear seats.

If your vehicle is equipped with 

additional navigation, please refer 

to the infotainment system manual 

separately supplied.

2&1/

2&1/

NOTICE

When the driver turns off the engine 

and opens the driver’s door after 

opening and closing a rear door, a 

warning message “Check rear seats” 

appears.

 WARNING

The rear seat passenger alarm system 

provides information to the driver to 

check the rear seats but it does not 

detect whether there is an object or 

passenger in the back seats. Please 

check the rear seats always when 

leaving the vehicle.

 CAUTION

The door open and close history is 

initialized if the driver turns off the 

engine and lock the vehicle door. Even 

though the rear door is not opened 

again, the alarm may sound if there is 

the previous record. For example, if the 

driver does not lock the vehicle door 

and opens the door to get off after the 

alarm sounds, the alarm may go off.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands