Hyundai BC3 Owner'S Manual Download Page 450

Page: 450 / 651

7-111

System malfunction and

limitations

System malfunction

OTM070125L

When Rear Cross-Traffic Safety system

is not working properly, the ‘Check

rear cross-traffic safety systems’

warning message will appear on the

cluster, and the system will turn off

automatically, or the system will be

limited. We recommend that the system

be inspected by an authorized HYUNDAI

dealer.

OTM070100L

When the outside rearview mirror

warning light is not working properly,

the ‘Check outside mirror warning icon’

warning message will appear on the

cluster. We recommend that the system

be inspected by an authorized HYUNDAI

dealer.

System disabled

OTM070124L

When the rear bumper around the rear

corner radar or sensor is covered with

foreign material, such as snow or rain,

or installing a trailer or carrier, it can

reduce the detecting performance and

temporarily limit or disable Rear Cross-

Traffic Safety system.
If this occurs, the ‘Rear cross-traffic

safety functions disabled. Radar blocked’

warning message will appear on the

cluster.
The system will operate normally when

such foreign material or trailer, etc. is

removed.
If the system does not operate normally

after it is removed, we recommend

that the system be inspected by an

authorized HYUNDAI dealer.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Brands by name

Popular brands