Hyundai BC3 Owner'S Manual Download Page 102

Page: 102 / 651

4-10

Instrument cluster

Dual clutch transmission shift

indicator (if equipped)

OBC3040010

OBC3040011

3.5-Inch

10.25-Inch

This indicator displays which shift lever

position is selected.
• Park :P
• Reverse : R
• Neutral : N
• Drive :D
• Manual shift mode : D1, D2, D3, D4,

D5, D6, D7

Warning and indicator lights

Information

Make sure that all warning lights are

OFF after starting the engine. If any light

is still ON, this indicates a situation that

needs attention.

Air bag warning light

This warning light illuminates:

When you set the Engine Start/Stop

button to the ON position. The air bag

warning light illuminates for about 6

seconds and then turns off when all

checks have been performed.
The air bag warning light will remain

illuminated if there is a malfunction with

the Safety Restraint System (SRS) air bag

operation.
If this occurs, we recommend that

you have the vehicle inspected by an

authorized HYUNDAI dealer.

Seat warning light

This warning light informs the driver and

front passenger that the seat belt is not

fastened.

For more details, refer to the “Seat

Belts” in chapter 3.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands