Hyundai BC3 Owner'S Manual Download Page 254

Page: 254 / 651

5-119

• If you use the automatic Bluetooth

connection function, a call may be

switched to the vehicle’s Handsfree

when you are taking on the phone

near the vehicle while the vehicle’s

engine is on. If you do not want the

system to connect with the device

automatically, deactivate Bluetooth

on your device.

• When a device is connected to the

system via Bluetooth, the device’s

battery may discharge faster.

Connecting a paired device

To use a Bluetooth device on your

system, connect the paired device to the

system. Your system can connect with

only one device at a time.
1. From the control panel, press the

[

PHONE

] button, and then select

Phone settings

Paired devices

• If there is no connected device,

press the Call/Answer button on the

steering wheel.

2. Turn the [

TUNE

] knob to select the

device to connect, and then press the

knob.

• If another device is already

connected to your system,

disconnect it. Select the connected

device to disconnect.

NOTICE

• If a connection ends because a

device is out of the connection

range or a device error occurs,

the connection will be restored

automatically when the device

enters the connection range or when

the error is cleared.

• Depending on auto connection

priority, connection to a device may

take time.

Disconnecting a device

If you want to stop using a Bluetooth

device or connect another device,

disconnect your currently connected

device.
1. From the control panel, press the

[

PHONE

] button, and then select

Phone settings

Paired devices

2. Turn the [

TUNE

] knob to select your

currently connected device and then

press the knob.

3. Press the [

1 RPT

] button to select

Yes

Deleting paired devices

If you no longer want a Bluetooth device

paired or if you want to connect a new

device when the Bluetooth device list is

full, delete paired devices.
1. From the control panel, press the

[

PHONE

] button, and then select

Phone settings

Delete devices

2. Turn the [

TUNE

] knob to select the

device to delete, and then press the

knob.

3. Press the [

1 RPT

] button to select

Yes

NOTICE

• When you delete a paired device, the

Call history and Contacts stored in

the system are also deleted.

• To re-use a deleted device, you must

pair the device again.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands