Hyundai BC3 Owner'S Manual Download Page 527

Page: 527 / 651

8-30

Emergency situations

WARNING

Expired sealant
Do not use the Tire sealant after

the sealant has expired (i.e. pasted

the expiration date on the sealant

container). This can increase the risk of

tire failure.

WARNING

Sealant
•  Keep out of reach of children.
•  Avoid contact with eyes.
•  Do not swallow.

Strictly follow the specified sequence,

otherwise the sealant may escape under

high pressure.

WARNING

To inflate tire pressure only (not with

flat tire),
Follow the instruction “Checking the

tire inflation pressure” provided in this

chapter.

Using the Tire Mobility Kit

CAUTION

Detach the speed restriction label (1)

from the sealant bottle (2), and place

it in a highly visible place inside the

vehicle such as on the steering wheel to

remind the driver not to drive too fast.

OLMF064103

1. Shake the sealant bottle.

ODN8079019

2. Screw connection hose (10) onto the

connector of the sealant bottle.

3. Ensure that button (9) on the

compressor is not pressed.

4. Unscrew the valve cap from the valve

of the defective wheel and screw

filling hose (3) of the sealant bottle

onto the valve.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands