Hyundai BC3 Owner'S Manual Download Page 183

Page: 183 / 651

5-48

Convenient features

WARNING

If the function does not work properly,

we recommend that the system be

inspected by an authorized HYUNDAI

dealer. Do not attempt to inspect or

replace the wiring yourself.

Low Beam Assist-Static light

(if equipped)

While driving a corner, for greater

visibility and safety, either the left or

right side Low Beam Assist-Static light

will turn on automatically. The Low

Beam Assist-Static light will turn on

when one of the following conditions

occur.
• Vehicle speed is less than 10 km/h

(6 mph) and steering wheel angle is

turned approximately 80 degrees with

the low beam on.

• Vehicle speed is between 10 km/h

(6 mph) to 90 km/h (56 mph) and

steering wheel angle is turned

approximately 35 degrees with the low

beam on.

• When the vehicle is in reverse with

one of the conditions above satisfied,

the light opposite to the direction the

steering wheel is turned will turn on.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands