Hyundai BC3 Owner'S Manual Download Page 441

Page: 441 / 651

Driver assistance system

7-102

Lane undetected

Lane detected

OBC3070017

OBC3070016

• If lane markings are not detected,

steering wheel control by Lane

Following Assist can be limited

depending on whether a vehicle is in

front or the driving conditions of the

vehicle.

• Even though the steering is assisted

by Lane Following Assist, the driver

may control the steering wheel.

• The steering wheel may feel heavier

or lighter when the steering wheel is

assisted by Lane Following Assist than

when it is not.

System malfunction and

limitations

System malfunction

OTM070118L

When Lane Following Assist is not

working properly, the ‘Check LFA (Lane

Following Assist) system’ warning

message will appear on the cluster. If

this occurs, we recommend that the

system be inspected by an authorized

HYUNDAI dealer.

Limitations of the system

For more details on system limitations,

refer to “Lane Keeping Assist (LKA)”

section in chapter 7.

WARNING

For more details on the system

precautions, refer to “Lane Keeping

Assist (LKA)” section in chapter 7.

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands

Hyundai BC3, Owner'S Manual

Search results

Summary of Contents for BC3

Reviews:

Related manuals for BC3

Brands by name

Popular brands