manualshive.com logo in svg

Hyundai BC3, Owner'S Manual

Share
Download
Hyundai BC3 Owner'S Manual Download Page 113

4-21

04

Shift to N to start engine 

(for smart key system and 

Automatic transmission/Dual clutch 

transmission)

This warning message is displayed if 

you try to start the engine with the shift 

button not in the N (Neutral) position.

i

 Information

You can start the engine with the shift 

lever in the N (Neutral) position.

Check BRAKE SWITCH fuse (for 

smart key system and Automatic 

transmission/Dual clutch 

transmission)

This warning message is displayed if the 

brake switch fuse is disconnected.
You need to replace the fuse with a new 

one. If that is not possible, you can start 

the engine by pressing the Engine Start/

Stop button for 10 seconds in the ACC 

position.

Door, Hood, Tailgate open indicator

OBC3040012

OBC3040012

This warning is displayed if any door or 

hood or tailgate is left open. The warning 

will indicate which door is open in the 

display. 

 CAUTION

Before driving the vehicle, you should 

confirm that the door/ hood/tailgate 

is fully closed. Also, check there is 

no door/hood/tailgate open warning 

light or message displayed on the 

instrument cluster. 

Summary of Contents for BC3












































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands