Fig. 48 Oil separator tank dirt trap maintenance
1
Oil return line
2
Union nut
3
Dirt trap housing
4
Strainer
5
O-ring
6
Screw fitting
➤ Open the canopy.
Dirt trap maintenance:
1. Undo the union nut
2
and bend the oil return line
1
to one side.
2. Unscrew the dirt trap
3
.
3. Remove and clean the strainer
4
and O-ring
5
.
4. Check the strainer and O-ring for function and wear.
Replace components if they are heavily worn.
5. Clean the housing and fitting
6
of the dirt trap.
6. Re-insert the strainer and O-ring in the housing and close with the fitting.
7. Refit the oil return line and tighten the union nut.
Making operational:
1. Reconnect the negative battery terminal.
2. Close the canopy.
Dispose of old parts and contaminated materials according to environmental regulations.
Starting the machine and performing a test run:
1. Switch the machine on and run it in IDLE mode for approx. 5 minutes.
2. Shut down the machine.
3. Wait until the machine has automatically vented.
Pressure gauge reads 0 bar!
4. Open the outlet valves.
5. Open the canopy.
6. Carry out a visual check for leaks.
7. Shut down the machine.
8. Close the canopy.
10 Maintenance
10.4 Compressor Maintenance
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
131
