8.2 Starting up and shutting down
Precondition No personnel are working on the machine.
NOTICE
Serious damage to the engine from cold-start fluid!
Cold-start fluids, such as ether or other starting sprays, can cause serious engine damage.
➤ Do not use cold-start fluids.
Fig. 20 Starting instruments
1
«Controller ON» switch
2
Control panel
3
Operating hours counter
4
Remote contact thermometer
5
«Ignition switch»:
0
STOP/OFF
I
ON
II
Preheating
III
START
6
Charging indicator lamp, Group alarm lamp
7
Compressed air outlet pressure gauge
Note the following when operating in snow and ice:
Significant snow or ice build-up can occur on the machine when operating in winter conditions.
➤ Remove any snow and/or ice from the machine before operating.
8.2.1 Commissioning the machine
The «Controller ON» switch is positioned inside the machine, behind the control panel.
Pictograms below the instrument panel describe the start-up process.
1. Open the enclosure.
2. Turn the «Controller ON» switch
1
to the “I” position.
3. Close and secure the enclosure.
4. Open all compressed air discharge valves.
8
Operation
8.2
Starting up and shutting down
68
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
No.: 9_9548 22 HCE
