CAUTION
Risk of burns from hot components and escaping oil!
➤ Wear long-sleeved clothing and gloves.
➤ Raise the cover.
10.4.3.1 Draining the cooling oil
To drain the entire cooling oil from the machine, you must remove the screw plugs of the oil sepa‐
rator tank and open the oil drain valve of the airend. If the machine is fitted with a closed floor pan,
you must remove the bungs from the floor panel.
■ If necessary, remove the bungs from the floor panel.
■ Remove the screw plug from the oil filler of the oil separator tank.
■ Remove the screw plug from the tank floor of the oil separator tank.
■ Open the oil drain valve at the airend.
■ Remove the oil filter.
➤ Comply with all instructions.
Draining the oil from the separator tank
Fig. 45 Plugs, oil separator tank
1
Oil separator tank
2
Tank floor, oil separator tank
3
Oil filler port
4
Screw plug
5
Gasket
6
Screw plug
7
Gasket
8
New gasket
9
New gasket
1. Position a receptacle beneath the oil separator tank (accessible through a hole in the floor pan‐
el).
2. Remove the screw plug from the oil filler port of the oil separator tank.
3. Remove the gasket at the oil filler port.
4. Dispose of the old gasket.
5. Loosen and remove the screw plug from the tank floor of the oil separator tank.
10 Maintenance
10.4 Compressor Maintenance
126
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
No.: 9_9548 22 HCE
