manualshive.com logo in svg

HPC MOBILAIR M27 PE, Operating Manual, Page: 68 / 312

Share
Download
HPC MOBILAIR M27 PE Operating Manual Download Page 68

6  Installation

6.1  Ensuring safety

Follow the instructions below for safe installation.
Warning instructions are located before a potentially dangerous task.

Disregard of warning instructions can cause serious injuries!

Complying with safety notes

Disregard of safety notes can cause unforeseeable dangers!
➤ Follow the instructions in chapter 3 'Safety and Responsibility'.
➤ Installation work may only be carried out by authorised personnel.

Further information Details of authorised personnel are found in chapter 3.4.2.

Details of dangers and their avoidance are found in chapter 3.5.

6.2  Reporting Transport Damage

1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage found.

6.3  Installing the options

➤ Comply with all instructions!

6.3.1  Perform regular maintenance on the chassis:

➤ See the separate document "Chassis Operating Manual" for instructions regarding mainte‐

nance on the chassis.

6

Installation

6.1

Ensuring safety

56

Operating Manual    Portable Rotary Screw Compressor  
MOBILAIR M27 PE  

No.: 9_9548 22 HCE

Summary of Contents for MOBILAIR M27 PE

























































































































































































































































































































Reviews:

No comments