3.4.3 Complying with inspection schedules and accident prevention regulations
The machine is subject to local inspection schedules.
Examples of operation in Germany
➤ Have the pre-commissioning inspection carried out according to the Ordinance on Industrial
Safety and Health, §15.
➤ Carry out recurring inspections to
DGUV Regel 100–500, chapter 2.11:
The user must ensure that the machine's safety devices are checked for function as required
or at least annually.
➤ Carry out oil changes to
DGUV Regel 100–500, chapter 2.11:
The user must ensure that the cooling oil is changed as required or at least annually and the oil
change must be documented. Intervals may be varied if an analysis proves that the oil is still
usable.
➤ Keep to inspection intervals in accordance with the Ordinance on Industrial Health and Safety
with maximum intervals as laid down in §16:
Inspection
Inspection interval
Inspection authority
Equipment inspec‐
tion
Before commissioning
Approved supervisory body
Internal inspection
Every 5 years after commissioning or
the last inspection
Competent person
(e. g. KAESER SERVICE technician)
Strength test
Every 10 years after commissioning
or the last inspection
Competent person
(e. g. KAESER SERVICE technician)
Tab. 60 Inspection intervals according to Ordinance on Industrial Health and Safety
Checking the lifting point
The user is responsible for ensuring that the machine's lifting point and fixings are inspected ac‐
cording to national regulations for wear and damage.
➤ Have lifting eye checked.
Lifting eye is not in order: The machine must not be transported by crane. Have the machine
repaired immediately.
3.5 Dangers
Basic instructions
The following describes the various forms of danger that can occur during machine operation.
Basic safety instructions are found in this service manual at the beginning of each chapter in the
section entitled 'Safety'.
Warning instructions are found before a potentially dangerous task.
3.5.1 Safely dealing with sources of danger
The following describes the various forms of danger that can occur during machine operation.
3
Safety and Responsibility
3.5
Dangers
26
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
No.: 9_9548 22 HCE
