7.2.2 Special measures for re-commissioning after storage or de-commissioning
➤ Carry out the following before every start-up of the machine after long period of storage or de-
commissioning:
Storage/de-
commissioning
period longer
than:
Action
5 months
Drive engine:
➤ Remove desiccant from engine air filter.
➤ Check the engine air filter.
➤ Check the engine oil filter.
➤ Drain the preserving oil from the engine.
➤ Fill up with engine oil.
➤ Check the engine coolant level.
➤ Check the battery charge state(s).
➤ Re-connect the battery (batteries).
➤ Check all fuel hoses for leaks, loose connections, wear and damage.
➤ Check all pressure hoses of the drive engine (engine oil, coolant, charging
air) for leaks, loose connections, wear and damage.
Compressor:
➤ Remove desiccant from compressor air filter.
➤ Check the compressor air filter.
➤ Check the compressor oil filter.
➤ Drain the preserving oil from the separator tank.
➤ Fill with cooling oil.
➤ Check all pressure hoses/lines of the compressor (cooling oil, compressed
air, control air, condensate) for leaks, loose connections, wear and dam‐
age.
Body:
➤ Clean the bodywork with a grease and dirt dissolving agent.
36 months
Technical condition:
➤ Have the overall technical condition checked by an authorised
KAESER SERVICE technician.
Tab. 66 Measures for re-commissioning the compressor after a long period of storage or de-commissioning
7.3 Checking installation and operating conditions
➤ Check and confirm all the items in the check list before first start-up of the machine.
Task
See chapter Confirmed?
➤ Are the operators fully conversant with safety regulations?
—
➤ Have all the installation conditions been fulfilled?
➤ Is there sufficient cooling oil in the separator tank?
7
Initial Start-up
7.3
Checking installation and operating conditions
58
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
No.: 9_9548 22 HCE
